Thursday, October 20, 2016

Gelli Arts® Printed Lampshade

Happy Thursday! Today I want to show you how you can create a unique and personal lampshade in a few very easy steps. Add some color and a personal touch to your interior.


Here’s what you need:



A lampshade, I used Jära from Ikea. It has a fabric top layer but the inside is made of plastic so the paint doesn’t bleed through.
Besides that - you need the hexagon shaped mini Gelli® plate, a brayer, stamps (they have to be bigger then the hexagon Gelli® plate, I used the new “Mixed Media Flowers #1” that I designed for Carabelle Studio), acrylic blocks, acrylic paint (I mixed my own color from Amsterdam acrylics), baby wipes, a paper piercer, a needle and embroidery thread.

Apply some paint to a craft sheet and roll out to cover your brayer with paint. Apply the paint to your stamp using the brayer. This way you will get a nice even layer of paint covering your stamp without paint going into the small openings.
Stamp on the Gelli® plate to transfer the paint from the stamp to the plate.



Then use the Gelli® plate as a stamp to create a border around the edge of the lampshade.
Make sure to clean the Gelli® plate with a baby wipe between stamping to keep the prints clean and crisp.



Why use a Gelli® plate and not stamp on the lampshade directly?
First of all, you will not get the hexagon shape unless you use a stencil which is more difficult and messy than using the Gelli® plate. Secondly, because of the consistency of the Gelli® plate, adding the paint to the lampshade goes much smoother and with a better result than stamping on the fabric directly.

Once you have completed the border you have to let the paint dry well. Then use a paper piercer to make holes around the edges of the hexagons. I made one on every corner and one in between the corners.


Then I started embroidering but I made a mistake. I crossed over to the next hole, like you see on the picture below, but then I realized that I could see those threads on the right side of the lamp when the light shines through.




So instead of crossing over I had to go back into the previous hole and then continue. See pictures. Go along all the edges of all hexagons this way and your lampshade is done.




You have to have some patience while making the holes and doing the embroidery but the result is worth it!



I hope you enjoyed this tutorial and got inspired to create some unique furniture yourself!


- Birgit



GIVEAWAY IS CLOSED
To enter the giveaway, click on the red "ENTER GIVEAWAY HERE" button below! (This will ensure that we can contact the winner and that entries are limited to one per person. One winner will be selected from all the entries via a random number generator to receive this very special giveaway!) Entries will be accepted until October 24,2016. The winner will be announced via Facebook page by 5:00PM EST the following day. 
(Birgit's stamps will be included in the giveaway package - not pictured above)



PS: Please—share your prints with us on our Facebook page, or on Instagram using the hashtag #gelliprint #gelliarts and #gelliplate. Tag us with @gelliarts on Instagram and Twitter too! We love to see what you're creating!!

Remember, we now have Gelli® partners all over the world, so it's easier than ever to find a Gelli® retailer near you!

Thursday, October 6, 2016

Haunted House Gelli Arts® Prints


Hi there! It’s Marsha back again with a couple of haunted print ideas for Halloween!

As you probably know, whenever there is paint left on the Gelli® Plate after a first print, you are in for a treat: you get to pull a second, GHOST print!


For these prints I was lucky enough to play with the brand new Gelli Arts® Mini Printing Plate Kits!

There are two new mini kits: one features the 3” round mini plate while the other kit features a 3” hexagon mini plate.

Each kit comes with a round storage case, which is not only handy to store the mini printing plate in, but it also doubles as a stamping block! Both kits also come with a super fun new texture tool and a piece of punchinella.

Step 1:
Use the mini kit to stamp a hexagon pattern on a white sheet of paper.


I used Ranger Distress Ink to stamp with. Distress Ink is a water-based dye ink and it beads up on the Mini Printing Plate. This creates a cool stamped image with a stippled effect.

Add the ink to the mini printing plate, make marks in the ink with the texture tool and stamp. Or add ink and stamp through the punchinella.

Leftover ink on the punchinella adds even more interest to the stamped images.

Don’t ink up the Mini Printing Plate after each stamped image, but see how many interesting ghost images and colour variations you can create after the initial ink up.

Watch the video to get a better look at how I created the background!


Step 2:
Create a couple of spooky masks. I drew the silhouettes of a house, bats and a couple of ghosts onto cardstock.


The drawings don’t need to be detailed, but it is fun to add a couple of openings like windows, doors, eye sockets or mouths in each of the masks.

Cut the masks.

Step 3:
Add a layer of paint to a Gelli® Plate of your choice. I used the 8" x 10" Gelli® PrintingPlate.


Arrange the masks on top of the paint and pull a print onto the hexagon patterned paper.

Remove the masks, but leave the remaining paint on the plate.

Step 4:


Add a layer of white (or another light paint colour) on top of the remaining paint on the plate.

Pull a second, ghost print onto black (or dark coloured) paper.

Step 5:
Repeat as often as you want!


Step 6:
Add details to your spookiest prints. Use pens, coloured pencils, stenciling or stamping!


You can add (blood) splatter by tapping onto a (red) paint marker.
Don’t forget your paint covered masks: they can be awesome distressed collage elements.

Step 7:


Frame the prints to add to your Halloween decor or use this technique to create unique and personal party invites!



Materials:

Gelli Arts®:
(COMING SOON) Gelli Arts® Mini Printing Plate Kit

Other:
Black and white paper
Cardstock
Stamping ink (Ranger Distress Ink: Black Soot, 
Dusty Concord, Shaded Lilac, Spiced Marmalade)
Acrylic paint (Royal Talens Amsterdam: Orange Reflex, 
Permanent Blue Violet, Titanium White, Ultramarine Violet)
Paint markers (Posca: black, red, white)
Fineliner

PS: Please—share your prints with us on our Facebook page, or on Instagram using the hashtag #gelliprint #gelliarts and #gelliplate. Tag us with @gelliarts on Instagram and Twitter too! We love to see what you're creating!!

Remember, we now have Gelli® partners all over the world, so it's easier than ever to find a Gelli® retailer near you!

You might also like:

Related Posts Plugin for WordPress, Blogger...